PC Admin Tools live demo

• Clear All Users' Temp FilesCleanup

  Removes %TEMP% from every user profile, incl. SYSTEM/service accounts

• Clear Windows System Temp (C:\Windows\Temp)Cleanup

  Deletes files in the Windows system temp directory

• Clear Windows Prefetch FilesCleanup

  Removes .pf files from C:\Windows\Prefetch

• Clear Thumbnail Cache (All Users)Cleanup

  Deletes thumbcache_*.db from all user Explorer profiles

• Clear Windows Update Download CacheCleanup

  Stops WU/BITS, clears SoftwareDistribution\Download, restarts services

• ! Flush DNS Resolver CacheCleanupsensitivebackground job

  Clears the DNS resolver cache + re-registers DNS; verifies the cache and reports SUCCESS / WARNING / FAILED

• Clear Browser Caches (Chrome / Edge / Firefox)Cleanup

  Purges browser cache folders for all user profiles

• Clear Windows Event LogsCleanup

  Clears Application, System, and Setup logs; skips Security if >100k entries

• ! Empty Recycle Bin (All Drives & Users)Cleanupsensitive

  Permanently empties the Recycle Bin on all drives

• ! Run Disk Cleanup Utility (cleanmgr)Cleanupsensitive

  Runs Windows built-in Disk Cleanup silently with all categories

• Disk Space Report (All Drives)Disk

  Shows used/free space and health status for all fixed drives

• Optimize / Defragment All Fixed DrivesDisk

  Defragments HDDs; runs TRIM on SSDs (auto-detects drive type)

• Scan Disk Health (Quick Scan — No Reboot)Disk

  Runs Repair-Volume scan on all drives without requiring a reboot

• Find Top 20 Largest Files on C: DriveDisk

  Identifies the biggest disk space consumers on the C: drive

• ! Set High Performance Power PlanPerformancesensitive

  Activates the built-in High Performance power scheme

• Optimize Visual Effects for PerformancePerformance

  Sets Windows to Best Performance visual mode (disables animations)

• Optimize RAM / Force Garbage CollectionPerformance

  Reports RAM usage before and after forcing .NET GC collection

• Auto-Tune SysMain / Superfetch (SSD Detection)Performance

  Disables SysMain on SSDs; keeps it active on HDDs

• Restart & Reset Windows Search IndexerPerformance

  Restarts WSearch service to free CPU/disk from heavy indexing

• Startup Programs & Services ReportPerformance

  Lists all auto-start programs from registry and scheduled tasks

• Virtual Memory / Page File ReportPerformance

  Shows current page file settings, usage and recommendations

• Non-Essential Running Services ReportPerformance

  Lists third-party services consuming CPU/memory resources

• Full System Information ReportWindows Health

  CPU, RAM, OS version, uptime, BIOS, and model info

• Top CPU & RAM Consuming ProcessesWindows Health

  Lists top 10 processes by CPU time and working set memory

• ! Run SFC /scannow (System File Check)Windows Healthsensitive

  Scans & repairs corrupted Windows system files (5-15 min)

• ! Run DISM Health Check & ScanWindows Healthsensitive

  Checks and scans the Windows component store for corruption

• Windows Update History ReportWindows Health

  Shows last 20 installed Windows updates with install dates

• Recent System & App Errors (Last 24h)Windows Health

  Pulls critical errors and warnings from System and Application logs

• Installed Software InventoryWindows Health

  Lists all installed applications with version and install date

• Network Adapter & IP ConfigurationNetwork

  Displays IP, subnet, gateway, DNS for all active adapters

• Test Network Connectivity (Ping Suite)Network

  Tests ping to gateway, DNS providers, Google, and Microsoft

• Network Adapter Speed & Traffic StatsNetwork

  Shows link speed, status, and byte counters for active adapters

• ! Reset TCP/IP & Winsock StackNetworksensitivebackground job

  Resets Winsock + TCP/IP, flushes DNS, renews the lease (every step timed and checked); reports SUCCESS / WARNING / FAILED -- reboot required afterwards

• DNS Resolution & Latency TestNetwork

  Tests DNS lookup speed for multiple domains

• Firewall & Security Status ReportNetwork

  Reports Windows Firewall profiles, AV products, and listening ports

• Active Network Connections ReportNetwork

  Lists all active TCP connections with owning process names

• Collect Evidence (Pre-Recycle Snapshot)Power Recycle

  Top CPU processes, CPU load, disk health, and last 100 System log events -- capture this BEFORE trying a fix

• Diagnose: Possible Driver Hang (Top Processes + Stuck Services)Power Recycle

  Top 10 CPU processes plus any service stuck in a Pending state -- a common symptom of a hung driver

• List Storage Controllers & Disk DrivesPower Recycle

  Lists DiskDrive-class and SCSI/Storage-class PnP devices with their Instance IDs

• List USB DevicesPower Recycle

  Lists USB-class PnP devices with their Instance IDs

• ! Cycle a Device Driver (Disable -> Enable by Instance ID)Power Recyclesensitive1 input

  Disables then re-enables one PnP device by Instance ID -- get the ID from a 'List ... Devices' report first Needs: Device Instance ID.

• ! Restart All Network AdaptersPower Recyclesensitivebackground job

  Restarts every active adapter and waits for each to come back Up; reports SUCCESS / WARNING / FAILED

• ! Restart Network Adapter by NamePower Recyclesensitivebackground job1 input

  Restarts one named adapter (Restart-NetAdapter), waits for it to come back Up; reports SUCCESS / WARNING / FAILED Needs: Adapter Name.

• ! Disable then Enable a Network AdapterPower Recyclesensitivebackground job1 input

  Full Disable/Enable cycle on one adapter, waits for it to come back Up; reports SUCCESS / WARNING / FAILED Needs: Adapter Name.

• ! Cycle All USB Hub DevicesPower Recyclesensitive

  Disables then re-enables every PnP device whose name matches USB -- fixes a USB device causing interrupts

• Firmware / BIOS Version ReportPower Recycle

  BIOS/firmware version and system model -- read-only, useful when suspecting a firmware bug

• ! Force Restart Now (Unsaved Work Will Be Lost)Power Recyclesensitive

  Restart-Computer -Force -- the firmware-bug workaround and the last resort before a real power cycle

• List Devices Armed to Wake the SystemPower Recycle

  powercfg /devicequery wake_armed (+ wake_programmable) -- diagnoses devices not waking correctly from sleep

• ! Disable HibernationPower Recyclesensitive

  powercfg /h off -- removes hiberfil.sys and Fast Startup/S4 hybrid-sleep behavior

• ! Force Sign-out & Restart (shutdown /g)Power Recyclesensitive

  shutdown /g /f /t 0 -- restarts and reopens registered apps, distinct from a plain restart

• ! Full Soft-Recycle Bundle (Network + USB Cycle, Restart Optional)Power Recyclesensitive1 input

  LAST RESORT before a real power cycle: restarts every adapter, cycles every USB device, then restarts Windows unless Auto-Restart is unchecked Needs: Automatically restart when done.

• ! Set Static IP AddressRemote Toolssensitivebackground job7 inputs

  Sets a static IPv4 address (+ optional DNS). Checks first, verifies the result, auto-rolls back if the admin tool can no longer reach the PC, and reports SUCCESS / WARNING / FAILED Needs: Adapter Name, IP Address, Subnet Mask (or CIDR, e.g. 24), Default Gateway, Primary DNS (optional), Secondary DNS (optional), Auto-rollback if the admin tool cannot reach the PC afterwards.

• ! Set Adapter to DHCP (Automatic)Remote Toolssensitivebackground job2 inputs

  Switches the adapter to DHCP, waits for a lease, verifies it, auto-rolls back to the old static settings if no lease / not reachable, and reports SUCCESS / WARNING / FAILED Needs: Adapter Name, Auto-rollback if the admin tool cannot reach the PC afterwards.

• ! Rename Computer (Domain-Joined)Remote Toolssensitive2 inputs

  Renames a domain-joined PC passing YOUR credential explicitly (-DomainCredential, then WMI Rename) -- no CredSSP needed; restart optional Needs: New Computer Name, Automatically restart when done.

• ! Rename Computer (Workgroup/Local)Remote Toolssensitive2 inputs

  Rename-Computer for NON-domain targets; refuses cleanly on a domain-joined PC instead of failing with 'Access is denied' -- restart optional Needs: New Computer Name, Automatically restart when done.

• ! Rename Computer via WMIC / WMI (Legacy -- Manual Restart Required)Remote Toolssensitive1 input

  wmic computersystem ... call rename on old targets; where WMIC is removed (Win11 24H2+) it automatically uses the WMI/CIM Rename method instead. Never auto-restarts Needs: New Computer Name.

• VSS Shadow Copy Storage ReportRemote Tools

  vssadmin list shadowstorage + list shadows -- size/usage per volume and every shadow copy instance

• ! Delete ALL VSS Shadow Copies (Every Volume)Remote Toolssensitive

  vssadmin delete shadows /all /quiet -- IRREVERSIBLE, removes every restore point on every volume

• ! Delete ALL VSS Shadow Copies for One VolumeRemote Toolssensitive1 input

  vssadmin delete shadows /for=<volume> /all /quiet -- IRREVERSIBLE for that volume only Needs: Volume (drive letter).

• ! Delete Oldest VSS Shadow Copy (One Volume, or Every Volume if Blank)Remote Toolssensitive1 input

  vssadmin delete shadows /for=<volume> /oldest /quiet -- loops every fixed volume if left blank Needs: Volume (blank = every fixed volume's oldest).

• Query Scheduled Task DetailsRemote Tools1 input

  Full details + last-run info for a named scheduled task, with a fuzzy-match fallback Needs: Task Name.

• Open Computer Management (Connected to Target)Remote Tools

  Launches mmc.exe compmgmt.msc /computer:\\<target> locally on the machine hosting this service (same as the desktop editions do on your own PC)

• ! Restart a Specific ServiceRemote Toolssensitive1 input

  Restart-Service -Force by exact service Name, reporting status before and after Needs: Service Name (not Display Name).

• List All Services (Name, Status, Start Type)Remote Tools

  Full raw Get-Service inventory -- every service, not just non-essential/third-party ones

• ! Map Network Drive for a User (Shared Folder -> Drive Letter)Remote Toolssensitive5 inputs

  Maps a shared folder to a drive letter for ONE user account on the target -- saved in that user's profile (reconnects at every sign-in) and connected live too if they are signed in Needs: Shared Folder Path (UNC), Drive Letter, Map It For This User Account, Also connect it right now if that user is signed in, Replace an existing mapping on this drive letter.

• ! Remove Mapped Network Drive for a UserRemote Toolssensitive3 inputs

  Removes a saved drive mapping from ONE user's profile on the target (and disconnects it live if that user is signed in) Needs: Drive Letter, Remove It For This User Account, Also disconnect it right now if that user is signed in.

• List Mapped Network Drives (Saved Per User)Remote Tools1 input

  Shows the drive mappings saved in a user's profile on the target -- use it to verify a mapping (blank user = everyone currently signed in) Needs: User Account.

• VSS Storage Size Report (Used / Allocated / Max vs Volume Size)Remote Tools

  Per volume: shadow storage Used, Allocated and Max (as GB and % of the volume), where it is stored, and the volume's free space

• ! Set VSS Max Storage Size (Resize / Create Shadow Storage)Remote Toolssensitive3 inputs

  vssadmin resize/add shadowstorage /maxsize=... -- limit how much disk shadow copies may use (e.g. 10GB, 20%, UNBOUNDED). Shrinking deletes the OLDEST copies Needs: Volume to protect (drive letter), Max size (e.g. 10GB, 20%, 500MB, UNBOUNDED), Store shadow data on (blank = same volume).

• Create a VSS Shadow Copy Now (One Volume)Remote Tools1 input

  Creates a restore point / shadow copy of one volume immediately (works on client and server Windows via WMI) Needs: Volume (drive letter).

• DISM: Analyze Component Store (Reclaimable Space)Performancebackground job

  Dism /Online /Cleanup-Image /AnalyzeComponentStore -- read-only; says whether a cleanup is worthwhile and how much WinSxS can be reclaimed

• DISM: Component Store Cleanup (StartComponentCleanup)Performancebackground job

  Dism /Online /Cleanup-Image /StartComponentCleanup -- removes superseded component versions from WinSxS. Safe; updates stay uninstallable. Can take many minutes

• ! DISM: Deep Cleanup (StartComponentCleanup /ResetBase)Performancesensitivebackground job

  Dism ... /StartComponentCleanup /ResetBase -- reclaims the most WinSxS space BUT already-installed updates can no longer be uninstalled

• DISM: Image Health Check + Scan (CheckHealth, ScanHealth)Performancebackground job

  Dism /CheckHealth then /ScanHealth -- detects Windows image corruption without changing anything (RestoreHealth is 'Run DISM' under Windows Health)

• WMI: Verify Repository + CIM Performance Snapshot (WMIC replacement)Performance

  winmgmt /verifyrepository plus a CIM snapshot of CPU, memory, page file, disks and top memory users. WMIC is removed on new Windows, so this uses CIM

• ! WMI: Salvage / Repair RepositoryPerformancesensitive

  winmgmt /salvagerepository (then /resetrepository only if still inconsistent and you re-run with it). Fixes slow or broken WMI/CIM queries. Restarts the WMI service

• ! Rebuild Performance Counters (lodctr /R) + Resync WMI PerfPerformancesensitive

  lodctr /R, winmgmt /resyncperf, wmiadap /f -- fixes missing or corrupt Task Manager / PerfMon counters

• Retrim SSD Volumes (Optimize-Volume -ReTrim)Performancebackground job

  Sends TRIM for every fixed NTFS volume on SSD media so the drive can reclaim free blocks. HDDs are skipped

• ! Page File: Switch to System-Managed SizePerformancesensitive

  Sets AutomaticManagedPagefile = True so Windows sizes the page file itself (fixes a too-small / fixed page file). Takes effect after a restart

• Open Computer Management on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- compmgmt.msc -- users, services, disks, event viewer in one console

• Open Device Manager on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- devmgmt.msc -- drivers and hardware

• Open Disk Management on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- diskmgmt.msc -- partitions, volumes, drive letters

• Open Defragment and Optimize Drives (dfrgui) on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- dfrgui.exe -- analyze / optimize / retrim drives with the GUI

• Open Disk Cleanup (cleanmgr) on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- cleanmgr.exe -- the classic Disk Cleanup window

• Open Services Console on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- services.msc

• Open Event Viewer on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- eventvwr.msc

• Open Task Scheduler on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- taskschd.msc

• Open Local Users and Groups on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- lusrmgr.msc (not on Home editions)

• Open Shared Folders on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- fsmgmt.msc -- shares, sessions, open files

• Open Windows Defender Firewall with Advanced Security on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- wf.msc -- inbound/outbound rules

• Open Network Connections (Network Adapters) on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- ncpa.cpl -- adapter properties, IPv4 settings

• Open Task Manager on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- taskmgr.exe

• Open Resource Monitor on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- resmon.exe -- CPU / memory / disk / network per process

• Open Performance Monitor on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- perfmon.msc

• Open System Properties (Advanced / Computer Name) on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- sysdm.cpl

• Open Programs and Features on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- appwiz.cpl -- uninstall programs

• Open Power Options on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- powercfg.cpl

• Open Control Panel on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- control.exe

• Open System Configuration (msconfig) on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- msconfig.exe -- boot and startup options

• Open Certificates (Local Computer) on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- certlm.msc

• Open Local Group Policy Editor on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- gpedit.msc (not on Home editions)

• Open Windows Update Settings on TargetAdmin Consolesbackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- ms-settings:windowsupdate

• ! Open PowerShell Window (Elevated) on TargetAdmin Consolessensitivebackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- powershell.exe -NoExit -- an interactive admin shell on the target's screen

• ! Open Command Prompt (Elevated) on TargetAdmin Consolessensitivebackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- cmd.exe -- an interactive admin shell on the target's screen

• ! Open Registry Editor on TargetAdmin Consolessensitivebackground job

  Opens on the TARGET's screen (not yours) using the admin credentials you entered -- regedit.exe -- edits the target's registry

• ! Push: Set Static IP (no wait)Network Pushsensitive6 inputs

  Pushes IP + mask + gateway + DNS1 + DNS2 to the adapter in ONE command and returns at once -- no status is read back. Use Ping Monitor to watch it come up Needs: Adapter Name, IP Address, Subnet Mask (or CIDR, e.g. 24), Default Gateway, Primary DNS (optional), Secondary DNS (optional).

• ! Push: Set Adapter to DHCP (no wait)Network Pushsensitive1 input

  Pushes address + DNS = DHCP in ONE command and renews the lease; returns at once -- no status is read back Needs: Adapter Name.

• ! Push: Flush DNS (no wait)Network Pushsensitive

  Pushes DNS cache flush + DNS re-registration and returns at once

• ! Push: Reset TCP/IP & Winsock (no wait)Network Pushsensitive

  Pushes Winsock + TCP/IP reset, DNS flush, release/renew and returns at once. A reboot is needed afterwards

• ! Push: Restart All Network Adapters (no wait)Network Pushsensitive

  Pushes a restart of every network adapter and returns at once

• ! Push: Restart Adapter by Name (no wait)Network Pushsensitive1 input

  Pushes a restart of one named adapter and returns at once Needs: Adapter Name.

• ! Push: Disable then Enable Adapter (no wait)Network Pushsensitive1 input

  Pushes a full Disable/Enable cycle on one adapter and returns at once Needs: Adapter Name.

• Ping Monitor (continuous -- press Stop)Network Push2 inputs

  Pings the host name and up to two IPs every second until you press Stop. Shows which IP is answering, so you can watch a changed IP come alive. Runs from this tool; nothing is sent to the target. Run it on its own Needs: Old IP to watch (optional), New IP to watch (optional).

113 of 113 operations shown